MD DP404 Can Açık Dijital Çıkışı

Brand: Gefran

The MD series by Gefran consists of pressure transmitters for use in High temperature environments

Explanation

It is designed specifically for melt pressure measurement and is only offered for use in large-scale stationary installations, large-scale stationary industrial vehicles, primarily extruders, or for inter-laboratory equipment for R&D purposes in accordance with European Directive 2011/65/EU (with RoHS II). see related factsheet).

Technical Information

Digital output signal with DP404 CAN OPEN communication protocol

Transmission frequency (Baud rate): 10 Kbaud to 1 Mbaud (default 500 Kbaud)

Software / Hardware selection of Baud rate and ID nodes

Operation with 1 or 2 settable alarm limits

"Autozero" for temperature compensation

Zero and span drift compensation

80% FS calibration signal

Pressure ranges: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi

Extensimetric measurement principle with Wheatstone bridge

Precision: < ± 0.25% FS (H); < ±0.5%FS (M)

Hydraulic transmission system to guarantee temperature stability.

Protection level: IP65

Standard threading: 1/2-20 UNF, M18x1.5; other versions on request

Standard diaphragm is 15-5 PH stainless steel with GTP+ coating

17-7 PH corrugated diaphragm with GTP+ coating for ranges below 100 bar-1500 psi

Further versions available on request.