MPS-PT-BSK Pressure and Temperature Control Set

MPS-PT-BSK Basınç ve Sıcaklık Kontrol Seti

MPS-PT-BSK Pressure and Temperature Control Set

Brand: MPS

Melt Pressure and Melt Temperature Control System

* MPS Melt Pressure Sensor

* MPS Controller

* GL5-6P-V (6 Pin Socket + Cable )

* BF18 (mounting bracket)

They are systems used for Melt Pressure and Melt Temperature Control in Extruder Processes.

You can control the Melt Pressure and Melt Temperature Information with a single Controller Device.

It provides a safer working environment thanks to its adjustable Set-Alarm outputs.

In addition, you can integrate it into your PLC system with the Analog Output or Communication Protocols in our Controller device.

Request a Quote

Explanation

Aim

*Checking the melt pressure, flow stability,

* To ensure the formation of the necessary pressure for production,

*Monitoring for possible contamination that could clog the filter changer and cause pressure drop in the mold, and as a result to determine if clogged filters need to be replaced (therefore the pressure is measured before and after the screen changer)

*The gear pump is used to give a constant flow rate to the mold: the flow is adjusted based on the measured pressure value (the pressure value is used to give feedback to the driver for screw speed adjustment)

*Creating necessary prescriptions for production,

* Evaluation of plastic raw materials,

*Controlling Pressure,

*Preventing excessive pressure on the screw,

* Protecting screw wear,