MPS PT-CT Mounting Hole Cleaning Kit

MPS PT-CT Mounting Hole Cleaning Kit

Brand: MPS

The Melt Pressure Sensor Cleaning Tool Kit is used to remove excess debris from the Melt Pressure Sensor mounting holes prior to installation.

Request a Quote

Explanation

Installation of sensors in clogged and/or dirty mounting holes is a major cause of mounting damage.

The Cleaning Tool Kit allows the mounting hole to be properly cleaned and checked for integrity.

Cleaning kits are available for 1/2-20 mounting holes (CT12) and M18x1.5 mounting holes (CT18).

Note: The cleaning kit should be used when the polymer has melted. Be careful not to exceed the specified torque (125 in-pounds) to avoid damaging the tool.